ATK Contributes to Launch of National Security Payload for the NRO
- Multiple ATK sites support United Launch Alliance Delta IV rocket launch
ATK (NYSE: ATK) technologies supported today's successful launch of a United Launch Alliance Delta IV rocket carrying a classified satellite (NROL-15) for the National Reconnaissance Office.
ATK designed and produced the nozzle for the Pratt & Whitney Rocketdyne (PWR)-built RS-68 first stage engine – the largest hydrogen-powered engine in the world – as well as the nozzle's thermal protection material, which is capable of shielding it from the extreme heat of launch when external temperatures can exceed 4,000 degrees Fahrenheit. The nozzle is manufactured at ATK's Promontory, Utah, facility. The NROL-15 launch represents the first use of the RS-68A engine and nozzle configuration, which provides increased launch capabilities to the Delta IV Heavy vehicle. The RS-68A is a Heavy Upgrade (HUG) version of the RS-68 engine design. PWR and ATK have worked together over the past several years to successfully develop, design and test this upgrade for use on the HUG missions.
Global Aircraft Fuel Market Analysis & Forecast Report 2016-2021
ATK supplied 13 key composite structures for the Delta IV launch vehicle including three thermal shields that house and protect the engines during flight, three centerbody structures that connect the liquid oxygen (LO2) and liquid hydrogen (LH2) tanks, two medium and one heavy skirt on the three Common Booster Cores (CBC), the composite interstage on the center CBC, the nose cones on the two strap-on boosters, and one set of x-panel structures that connect the upper stage LOX tank with the upper stage hydrogen tank.
The composite structures range from four to five meters in diameter and up to eight meters in length. They were produced using advanced hand lay-up, machining, and inspection techniques at ATK's production facility in Iuka, Miss., with additional hardware produced at the Clearfield, Utah facility.
Source : Alliant Tech Systems, Inc (ATK) (NYSE: ATK)
Apr 3 - 6, 2017 - Washington, United States